Free DIY Furniture Plans to Build a Town Haus Inspired Doggie Den | Home & Garden

Designs by Studio C

Doggie Den

Project Details

If you need something fabulous for your furry friends this holiday season, then this Free DIY Furniture Plan to Build a Town Haus Inspired Doggie Den is just the thing for you!Psst... If you would like to celebrate the holidays a tad early with a full week of giveaways, from me (and some lovely sponsors) to you, then please check in daily for more information and a giveaway schedule... I would hate for you to miss out on the fun! Xx...Rayan

Estimated Cost

$50-$75

Dimensions Tools

• Tape Measure
• Saw – Jig, Circular, or Miter
• Drill
• Square
• Sander
• Kreg Jig 

Lumber

• One half sheet of ¾” plywood
• One quarter sheet of ½” plywood
• 1 – 1x2 at 3’
• 4 – 1x3 at 8’
• 1 – 1x6 at 6’
• 2 pieces of ½” trim at 6’
• 2 pieces of 2-1/2” trim at 6’

Materials

• 1-1/4” pocket hole screws
• Edge banding for the plywood, optional
• 1 – Cupboard catch
• 1 set of hinges
• Decorative punched aluminum
• Turnbuttons and screws
• Wood filler
• Sandpaper
• Wood glue
• Finishing Supplies

Cut List

• 4 - 1x3 at 25-3/4” – Side Frames
• 4 – 1x3 at 24-1/2” – Side Frames
• 2 – 1x6 at 24-1/2” –Side Frames
• 2 – ½” plywood at 11” x 24-1/2” – Side Panels
• 1 – ¾” plywood at 23-1/2” x 25-3/4” – Back
• 1 – ¾” plywood at 23-1/2” x 28-3/4” – Bottom
• 1 – 1x2 (ripped to 1” wide) at 23-1/2” – Upper Stretcher
• 1 – 1x3 (ripped to 2-1/4” wide) at 23-1/2” – Lower Stretcher
• 2 – 1x3 at 18-1/4”- Door Frame
• 2 – 1x3 at 21-1/2” – Door Frame
• 1 – ¾”plywood at 26” x 30-1/2” – Top
• 2 – ½” trim at 30” – Upper Trim
• 2 – ½” trim at 26” – Upper Trim
• 2 – 2-1/2” trim at 30” – Lower Trim
• 2 – 2-1/2” trim at 26” – Lower Trim

Instructions